Products

PEL-41
PEL – 41 – Surface / Wraps
April 28, 2015
CEL
CEL – Surface / Wraps 4’
June 5, 2015
Show all
AP2Wide

AP2-W 2’,4’,8’


  • Surface
  • Enclosed & Gasketed
  • Fiberglass
  • Wet Location

Sealed weatherproof vapor tight luminaires that can withstand extraordinary wear and tear. Internal gear tray containing ballast, sockets and wiring is easily removable and secured with safety straps, enabling one person handling. No holes have to be drilled through the housing for installation. Economical Mounting System can provide dramatic savings on the installation labor. Suitable for indoor and outdoor applications, such as parking garages, food processing facilities, refrigerated storage, pedestrian tunnels and other applications where protection from dust and waster is required.
Available in three lengths (2’, 4’ & 8’).

Description

GENERAL DESCRIPTION:

Sealed weatherproof vapor tight luminaires that can withstand extraordinary wear and tear. Internal gear tray containing ballast, sockets and wiring is easily removable and secured with safety straps, enabling one person handling. No holes have to be drilled through the housing for installation. Economical Mounting System can provide dramatic savings on the installation labor. Suitable for indoor and outdoor applications, such as parking garages, food processing facilities, refrigerated storage, pedestrian tunnels and other applications where protection from dust and waster is required.
Available in three lengths (2’, 4’ & 8’).

CONSTRUCTION:

One-piece fiberglass housing. Poured in place gasket seals the enclosure from most hostile environments. Supplied with plastic high impact tension latches which are also available in stainless steel and with tamper resistant screws as options. Tension latches seal the entire fixture liquid tight.

SHIELDING:

Durable lenses with smooth outside surfaces prevent dirt accumulation and allow for easy cleaning. Impact resistant acrylic or UV stabilized polycarbonate lens available.

ELECTRICAL:

Instant start electronic ballast, 120V-50/60Hz. Other ballasts and voltages available upon request. Available for T8 or T5 lamps.

CERTIFICATIONS:

CSA and/or UL approved, IP65, IP66, IP67, NEMA 4x, NSF certified
UL certified for Wet locations

Ordering Information
AP2W MODULE LENGTH LAMPS* WATTS* SHIELDING* LATCHING OPTIONS REFLECTOR MOUNTING VOLTAGE BALLAST
  • 2 = 27 11/16″
    4 = 51 13/16″
    8 = 100 1/8″
  • 1
  • 2
  • 3
  • 4
  • 6
  • 14 (2′ T5)
    24 (2′ T5HO)
    17 (2′ T8)
    28 (4′ T5)
    54 (4′ T5HO)
    32 (4′ T8)
    59 (T8SL 8′)
    86 (T8HO 8′)
  • PCLR = Lineal ribbed Polycarbonate
    ACLR = Lineal ribbed impact resistant Acrylic
    LIRA = Clear impact resistant Acrylic
  • LCW = Secure Locking Latch
    LCWT = Tamper Resistant Secure Locking Latch
    LSS = Stainless Steel Latch
    LSST = Tamper Resistant Stainless Steel Latch
  • HT = Specular
  • MR = Maximum Reveal 97%
    OMIT for B.W.E. (Standard White)
  • MB = Stainless Steel Mounting Bracket (surface mounting)
    MBV = Stainless Steel Mounting Bracket with Bail (chain suspension – chain by others)
  • 120
  • 277
  • 347
  • IS
  • PRS
  • RS

* Not all the options are available for all Modules – see Spec Sheets for details

Accessories / Print Spec Sheet
Images
AP2W