Products

ITAR-4-260
IT – Surface / Industrial Strips
April 10, 2015
LS-4-232
LS – Surface / Strips
April 10, 2015
Show all
LOPA-HB-15-4-632-MR

LOPA – HB – Surface / High Bay


  • Surface
  • Suspended
  • High Bay

Shallow profile, high performance, low brightness luminaire offering energy savings over traditional metal halide fixtures. The high efficiency and relatively uniform light distribution reduce glare and eliminate shadows and hot spots. Fluorescent lamps start instantly and eliminate the warm-up period required for HID lamps. Longer lamp life reduces the frequency of lamp replacement. Optional wire guard available.

Description

GENERAL DESCRIPTION:

Shallow profile, high performance, low brightness luminaire offering energy savings over traditional metal halide fixtures. The high efficiency and relatively uniform light distribution reduce glare and eliminate shadows and hot spots. Fluorescent lamps start instantly and eliminate the warm-up period required for HID lamps. Longer lamp life reduces the frequency of lamp replacement. Optional wire guard available.

CONSTRUCTION:

Rigid one piece body constructed from code gauge steel.

FINISH:

Standard finish is high gloss white polyester powder coat paint. Baked white enamel.

REFLECTOR:

High Bay individual lamp reflectors with HT or MR finish as an optional upgrade. Flat reflector option available.

SHIELDING:

While the wide spread light distribution allows for visual comfort without any shielding, option available for 15” module is a clear acrylic prismatic wrap-around diffuser with ribbed sides, which is easily removable without any hardware.

ELECTRICAL:

Instant start electronic ballast, 120V-50/60Hz. Other ballasts and voltages available upon request.

CERTIFICATIONS:

CSA and/or UL approved.

Ordering Information
LOPA HIGH BAY MODULE WIDTH MODULE LENGTH LAMPS WATTS SHIELDING/ Wireguard options* REFLECTOR MOUNTING/LENGTH OPTIONS VOLTAGE BALLAST/DRIVER
  • HB – Individual reflectors
  • HBF – Flat reflector
  • 15 = 15 3/4″ nominal
  • 24 = 24″
  • 4 = 4′
  • 3
  • 4
  • 6
  • 8
  • 32 = 32 (T8)
  • 54 = 54 (T5HO)
  • AC = Wrap-around Acrylic lens
  • WG = Wireguard
  • WG12 = Wireguard with #12 lens
  • OMIT for none
  • MR = Maximum Reveal White 97%
  • HT = Specular 
  • OMIT for B.W.E. (Standard White)
  • ACY = Aircraft Cable “Y”
  • VL = “V’ link for chain suspension (chain by others) 
  • OMIT for surface mounted
  • Specify length (inches)
  • C6 = 6′ Power cord ***
  • OS = Occupancy Sensor
  • 120 Volts
  • 277 Volts
  • 347 Volts
  • IS
  • PRS
  • RS

* not all options are available for all configurations – see Spec Sheets for details

Accessories / Print Spec Sheet
Images